The Octagon Band - Mens Wedding Ring

This item has been sold, however if you are interested in having this piece or a similar one made for you, please use the contact form to send us a message. We usually respond within 24 hours or less!
?Please select the metal you would like used. All metals are solid (Not plated)


Stone Type: 
Setting Type: 
10k Rose Gold
10k White Gold
10k Yellow Gold
14k Rose Gold
14k White Gold
14k Yellow Gold
18k Yellow Gold
Sterling Silver
SKU: RI949


A quality made wedding band.

Made with an 8 sides and slightly beveled edges with a polished comfort fit inside. The band is pictured with a combination satin/polished finish. 
I personally hand craft each end every ring to be as good as my hands can possibly make it. 

Made with quality USA Milled solid casting grains. These rings are each carved from wax, and then cast one at a time, using the age old Lost Wax casting method. This produces a solid ring, with no solder seams.

Each ring is 5.5mm wide. The inside is carefully hand polished. I do not mass finish or tumble any of my work.

The ring is very comfortable to wear and is made to order in your ring size. If you are not sure about your ring size, please order a set of my ring sizers first to confirm, which are available in my shop.

Each one takes about 1-2 weeks to make. Please select your size when checking out.

1. Made in the metal of your choice.

2. Select your ring size (Please note that if these rings are re-sized, the point spacing will no longer be equal all the way around)

 3. Select your finish.  The ring pictures has a satin finish.


starburst 8 sided octogon
Share Facebook Twitter